Speed 500
Aircraft


Sport & Scale Aircraft For Speed 500, 600


Me-163L & small.-1jpg.jpg (37994 bytes)

Cat. No. 10ME163M

 

Me-163 COMET
for speed 500 motors

Photo above shows the new Me-163
beside our speed 400 sized Me-163



Me-163 COMET
SPEED 500

Epoxy fiberglass fuselage with
vertical fin molded in place

Vacuum formed  rudder

Hollow molded fiberglass
wings with live hinge
control surfaces

Clear raised lined canopy

CD  photo instructions
Entire airframe panel
lined top and bottom
Comes in gray

SPECIFICATIONS

Wing Span - 40 in
Wing Area - 297.5 sq.in.
Wing loading - 18-20 oz./ sq. ft.
Ready weight - 38-40 oz.
Airfoil -SD 6060 Mod

Motor Brushless
AXI 280820 with 8.5x6 prop
Mega 16156 with  8x4 prop
Eflite park 480 with 9x6 prop
Battery 3S to 4S LiPoly

ESC motor control-40 amp brushless

Functions
Elevons, throttle
rudder optional


We are happy to announce the release of a new Me-163 COMET.  This plane is owned by Scott Sanford who acquired it through a couple of hobby enthusiast.  We went over the airframe and made some changes to make it fit in with the K&A line of fine quality kits that we offer.   This Me-163 is in the early flight tests.  The glide tests have been done by Scott and next is the power on test which we expect to go without a hitch.   The kit goes together over a weekend.  The vertical fin is molded in place to the fuselage and the wings are fully hollow molded fiberglass with the control surfaces pre-hinged for you.  The detail on this airframe is outstanding and very scale like.  It comes with a clear canopy, vacuum formed rudder and all wood required.  If your in the market for a great looking Me-163 this is the ticket.  This plane requires a 3 channel radio with 3 mini servos.     

 

Greg Mehojah-1076.jpg (19087 bytes)

Cat. No. 10147-P






HEINKEL He P 1076
SPEED 500

Cat. No. 10147-P
Pre-primed fuselage
Pre-sheeted wings
Pre cut to shape stabilizer
& tip blocks
Vacuum formed belly pan
Clear raised lined canopy
Plans & instructions

 

SPECIFICATIONS

Wing Span - 31.75 in
Wing Area - 167 sq.in.
Wing loading - 32-34 oz./ sq. ft.
Ready weight - 38-40 oz.
Airfoil -SD 6060 Mod

Motor Brushed
Speed 500 ,7.2 volt
with 8 x 4.5 prop on 8-10 NiMH
cells or a 2-3 cell LiPoly pack
Motor Brushless
AXI 280820 with 8.5x6 prop
Mega 16156 with  7x4 prop
8 to 10 NiMH cells or 2-3
cell LiPoly pack.

ESC motor control - 30 amp brushed
ESC motor control-30 amp brushless

Functions
Ailerons, elevator, throttle
rudder optional


We are happy to announce the release of our new HEINKEL He P 1076.  This plane was designed by Steve Toschi who also designed the Stoli MiG 15 EDF.  When I flew this plane last year I knew we had to add it to our kit line.   The HEINKEL 1076 is a super nice flying plane.  Set up with an speed 500 brushed motor on 8 NiMH cells swinging a 7x7 prop this plane will go vertical until its out of site.  Flight times are around 6 minutes and it nothing but fun the entire time.   Use with a brushless motor and LiPoly cells will deliver the same outstanding performance and flight times 3 times longer then the NiMH type cells.   The kit is a standard K&A kit with an epoxy fiberglass fuselage, foam core wings.  The vertical fin is molded in with this plane as many of our kits are anymore.  It comes with a clear canopy, vacuumed formed belly pan and all wood required.  If your in the market for a great looking HOT ROD the HEINKEL 1076 is the ticket.  This plane requires a 3 channel radio with 3 mini servos and mini receiver.     

 

Matrix_s.jpg (13391 bytes)

Cat. No. 10148






MATRIX
HOTLINER
  • Epoxy fiberglass fuselage
  • Foam core wings
  • Precision cut balsa & ply parts
  • Plans & instructions

SPECIFICATIONS

Wing Span - 42 in
Wing Area - 206 sq.in.
Wing loading - 16-18 oz./ sq. ft.
Ready weight - 19-23 oz.
Airfoil -RG Series

Motor Brushed
Speed Pro 480 7.2 with 5x5 prop
on 8-10 NiMH cells or 2-3
LiPoly pack

Motor Brushless
Mega 16153 with 4.7x4.7 prop
Mega 16154 with 4.7x4.7 prop
with 8-10 NiMH cells or 2-3
LiPoly cells

ESC motor control-brushed 30 amp
ESC motor control brushless 30 amp

Functions
Ailerons, elevator, throttle
rudder optional


We are happy to announce the release of our new hotliner the MATRIX.  This plane was designed for multi task flying.  The size of the MATRIX allows you to go from a pro speed  480 motor all the way up to an 05 brushless application and up to 10 cells.  The all up weight of the MATRIX running the pro 480 motor on 10 600AE size cells is only 23 oz.   The use of a brushelss motor and LiPoly cells will deliver outstanding performance and flight times 3 times longer then the NiMH type cells.  The MATRIX is extremely stable in flight and is a great aerobatic performing plane.  Another nice feature about the MATRIX is its ability to thermal.  This is due to the triple airfoil wing design used on the MATRIX and the low wing loading.  If your looking for a plane that you can just relax and ride a thermal and then pick up the pace for great aerobatic flying the MATRIX is a great choice.   This plane requires a 3 channel radio with 3 micro servos and mini receiver.     

 

P-51D MUSTANG

Pre-primed epoxy fiberglass fuselage
with separate cowl and airscoop

Pre-sheeted foam core wings
Pre-cut to shape tail surfaces
Molded in exhaust stacks
Clear raised lined canopy
Plans with instructions

SPECIFICATIONS

Wing Span - 36"
Wing Area - 211 sq.in.
Wing loading - 18 -20 oz./ sq. ft.
Ready weight - 38 - 42 oz.
Airfoil -Eppler 374

Motor brushed
Speed 500 with 2.3:1 beltdrive on 10x8 prop
8-10 cell NiMH or 2-3 cell LiPoly
Motor brushless
AXI 281412 with 9.5x5 prop
Phasor 30/3 with 10x6 prop
8-10 cell NiMH or 2-3 cell LiPoly

ESC motor control brushed 30 amp
ESC motor control brushless 40 amp

 

Functions
Ailerons, elevator, throttle
rudder optional

p51d_c.jpg (20460 bytes)

Cat. No. 10116-P


The P-51D is a outstanding performing electric plane. The construction is fast,  easy and this P-51D is a dream to fly.   Designed for use with either brushed or brushless motors the P-51D MUSTANG will go vertical until its out of sight.  If you like scale warbirds that deliver outstanding performance like the real birds the P-51D MUSTANG is a great choice. Requires a 3 channel radio and will house standard servos and receiver. 

 

P-40 WARHAWK
Cat. No. 10115-P

Pre-primed epoxy fiberglass
fuselage with separate cowl & belly pan

Pre-sheeted  foam core wings
Pre-cut to shape tail surfaces

Clear raised lined canopy
Vacuum formed landing gear covers

Plans with instructions

SPECIFICATIONS

Wing Span - 38"
Wing Area - 251 sq.in.
Wing loading - 25-27 oz./ sq. ft.
Ready weight - 39 - 42 oz.
Airfoil - SD 6060

Motor brushed
Speed 500 with 2.3:1 beltdrive on 10x8 prop
8-10 cell NiMH or 2-3 cell LiPoly
Motor brushless
AXI 281412 with 9.5 x5 prop
Phasor 30/3 with 10x6 prop
8-10 cell NiMH or 2-3 LiPoly

ESC motor control brushed 30 amp
ESC motor control brushless 40 amp

Functions
Ailerons, elevator, throttle
rudder optional

p40_c.jpg (19294 bytes)

Cat No. 10115-P


 

The P-40 Warhawk is another great example of scale looks and great performance.  We use the same set up as we do in the FW-190 and the P-51D with this great looking bird. The results is the same, power to spare and vertical until it's out of sight.  These  Warbirds are very hard to beat for all out performance and superb looks.   Requires a 3 channel radio with 1 standard servo and 2 micro servos. A mini or standard receiver can be used.

 

FOCKE WULF 190A-E

Cat. No. 10127-P

Pre-primed fuselage with separate cowl
Pre-sheeted wings
Pre-cut to shape balsa & ply parts
Clear raised lined canopy
Vacuum formed cockpit floor with
instrument panel
Plans with instructions

SPECIFICATIONS

Wing Span - 36.5"
Wing Area - 237.25 sq.in.
Wing loading - 25-27 oz./ sq. ft.
Ready weight - 39 - 42 oz.
Airfoil - SD 6060

Motor brushed
Speed 500  with a 2.3:1 belt drive on 10x8 prop
8-10 NiMH cells or 2-3 LiPoly
Motor brushless

AXI 281412 with 9.5x5 prop
Phasor 30/3 with 10x6 prop
8-10 cell NiMH or 2-3 LiPoly

ESC motor control brushed 30 amp
ESC motor control brushless 40 amp

Functions
Ailerons, elevator, throttle
rudder optional

fw109_c.jpg (17775 bytes)

Cat. No. 10127-P
9


 

The Focke Wulf 190A is and outstanding performing electric plane. With an average flying weight of only 40 ounces the FW 190A takes to the sky with ease. The FW 190A launches very smoothly and handles extremely well in flight. Try the FW 190A and see why electric flight is so popular. Requires a 3 channel radio with standard servos and standard receiver.

 

Copyright 1998 K&A Models Unlimited
All rights reserved.
Revised: 02/26/13 .
Prices subject to change without notice